Product Center

Polyethylene catalyst

Plastic additives

Plastic Additives

Anti-caking agent

Zinc stearate

Other products

Rotational molding powder(MDPE,MDmPE)

Crude Toluene

TH-5 Catalysts

Series: Metallocene series

Product introduction:

TH-5 is metallocene catalysts with A,B and C type, which can be used for Unipol, Innovene (Without pre-polymerization) and Spherilene gas phase polymerization process for producing full density mPE resins.This catalyst had filled the gap in China and is the international leader.

Xinsu chemical is the unique domestic metallocene catalyst manufacturer.

Brand	MI g/10min,2.16kg	Density g/cm³	Resin Application
TH-5A	1.0~7.0	0.910~0.940	Film grade, pipe grade
TH-5B	0.5~100.0	0.905~0.960	Film grade, pipe grade injection grade, rotational molding grade
TH-5C	0.3~1.5	0.915~0.940	Film grade, pipe grade

TH-5 Catalysts(图1)

Technical charateristic of metallocene catalysts:

TH-5A Narrow MWD TH-5B Broad MWD TH-5C Broad MWD

TH-5 Catalysts(图2) TH-5 Catalysts(图3) TH-5 Catalysts(图4)

TH-5 Catalysts(图5) TH-5 Catalysts(图6) TH-5 Catalysts(图7)

Characteristics:

•Medium activity (5000 ~ 10000kgPE/kgCAT),capable for condensing mode

•Little static, no agglomeration, long operation cycle

•Excellent mechanical and optical properties, good heat sealing performance

•Dry resin, little fines, good fluidized state

Market

TH-5 Catalysts(图8)

TH-5A product introduction:

TH-5A is used to produce narrow MWD mPE which has excellent impact strength and toughness, falling dart impact, optical properties and heat sealing performance.

Grade	MI g/10min,2.16kg	Density g/cm³	Comonomer	Applications	Benchmarking brands
Film grade	1.0	0.918	Hexene	Packing film	Exceed1018HA
	2.0	0.918		Packing film	Exceed2018HA
	3.5	0.918		Casting film	Exceed3518CB
	3.5	0.927		Casting film	Exceed3527PA
	1.3	0.927		Packing film	Exceed1327HA
Pipe grade	0.6	0.937		PE-RT pipe	SP980

The film has good mechanical properties.

TH-5 Catalysts(图9)

TH-5B product introduction:

TH-5B is metallocene catalyst containing bridging group. It can produce mPE with melt index of 0.1~100g/10min and density of 0.905 ~ 0.960g/cm³.The mPE products have excellent mechanical properties and processing performance.

Can produce mulching film product with good processing performance, excellent viscosity and hardness and also good light transmittance.

TH-5 Catalysts(图10) TH-5 Catalysts(图11)

The low-temperature ice bags produced with good hardness, falling dart impact,

puncture resistance, low-temperature sealing and high adhesion force.

TH-5 Catalysts(图12) TH-5 Catalysts(图13)

The injection grade and rotational molding grade products with good hardness and viscosity balance.

TH-5 Catalysts(图14) TH-5 Catalysts(图15)

Resin grades and applications

Resin grade	MI g/10min,2.16kg	Density g/cm³	Comonomer	Applications
Film grade	0.3	0.927	Hexene	Heat shrink film
	0.5	0.935		Heat shrink film
	0.9	0.934		Heavy duty film
	1.0	0.920		Agriculture film
	1.3	0.927		Packing film
Pipe grade	0.5	0.937		PE-RT pipe
Injection grade	4.0	0.950		Bottle cap

TH-5C product introduction:

TH-5C is used to produce broad MWD mPE which has excellent processing performance, optical performance, better shrinkage and toughness.

Resin Grade	MI g/10min,2.16kg	Density g/cm3	Comonomer	Applications	Benchmarking brand
Film grade	0.3	0.927	Hexene	Heat shrink film	Enable2703CH
	0.5	0.935		Heat shrink film	Enable3505HH
	1.0	0.920		Agriculture film	Enable2010CH

The single layer heavy duty bag produced which can reduce the production cost and also have good mechanical properties.

TH-5 Catalysts(图16)